TOTAL PRO CF-5 1.75
€54.00
Tax included
TOTAL PRO CF-5 is impact-resistant carbon-fiber (5%) TPU-based composite for printing gears, noise-proof housings, mechanically loaded parts. It has high chemical resistance to acid and alkali solutions, fats, oils, xylene, gasoline, kerosene.
Due to low shrinkage (up to 0.8%) and high abrasion resistance, TOTAL PRO plastic will be a great alternative to nylon.
Perfectly amenable to drilling, threading and processing with "Dremel" tool.
For best results, it is recommended to dry for 2-3 hours before printing at a temperature of 60-70°C.
369918465104
4 Items
Data sheet
- Bed temperature
- 80-100°
- Density
- 1.16 g/cm3
- blowing
- if necessary 20-60%
- Nozzle temperature
- 215-240°C
- Print speed
- до 70 mm/s
- Filament feed
- 97-100%
- Nozzle diameter
- up to 0.25 mm (min)
- Min. layer height
- 0.1 mm
- Temperature resistance (min/max)
- от -50 до +120°С
- Bar diameter tolerance
- 0.02 mm
- Quantity per reel
- 265 m
- Shrinkage in the manufacture of products
- 0.2-0.8%
Specific References
- ean13
- 0369918465104
- upc
- 369918465104
Comments (0)
No customer reviews for the moment.
TOTAL PRO CF-5 is impact-resistant carbon-fiber (5%) TPU-based composite for printing gears, noise-proof housings, mechanically loaded parts. It has high chemical resistance to acid and alkali solutions, fats, oils, xylene, gasoline, kerosene.
Due to low shrinkage (up to 0.8%) and high abrasion resistance, TOTAL PRO plastic will be a great alternative to nylon.
Perfectly amenable to drilling, threading and processing with "Dremel" tool.
For best results, it is recommended to dry for 2-3 hours before printing at a temperature of 60-70°C.