TOTAL PRO GF-10 1.75
search
  • TOTAL PRO GF-10 1.75
  • TOTAL PRO GF-10 1.75

TOTAL PRO GF-10 1.75

€52.00
Tax included

TOTAL PRO GF-10 is impact-resistant glass-filled (10%) TPU-based composite with heat resistance up to 110°C for printing large gears, durable housings, mechanically loaded parts, aerodynamic body kits for cars.

It has high chemical resistance to acid and alkali solutions, fats, oils, xylene, diesel fuel. Limited to gasoline, kerosene, acetone, dichloromethane..

Due to low shrinkage (up to 0.9%), good interlayer adhesion and high abrasive resistance, TOTAL PRO GF-10 plastic will be an excellent alternative to polyamides-based composites..

Perfectly amenable to drilling, threading..

For best results, it is recommended to dry for 2-3 hours before printing at a temperature of 60-70°C. .

ATTENTION! Plastic is abrasive, it is recommended to print using a steel nozzle.

Масса нетто: 750
Диаметр: 1.75
Color: Off White
Quantity

369918465081
3 Items

Data sheet

Bed temperature
60-100°
Density
~1.4 g/cm3
blowing
if necessary 20-60%
Nozzle temperature
230-250°C
Print speed
до 100 mm/s
Filament feed
95-100%
Nozzle diameter
up to 0.4 mm (min)
Min. layer height
0.1 mm
Temperature resistance (min/max)
от -50 до +110°С
Bar diameter tolerance
0.03 mm
Quantity per reel
250 m
Shore D hardness
85
Elongation at break
15%
Tensile modulus
3000 MPa
Vicat softening temperature
110°C
Maximum breaking strength
~75 MPa
Shrinkage in the manufacture of products
0.5-0.9%
Comments (0)
No customer reviews for the moment.